Page 25 of 26 FirstFirst ... 15212223242526 LastLast
Results 241 to 250 of 255

Thread: Kronos (reborn) topographic

  1. #241
    Guild Adept Harrg's Avatar
    Join Date
    Apr 2011
    Location
    Russia. Россия
    Posts
    314

    Default

    Another sketch. I worked for a long time on more detailed tectonics to understand how my “Tibetan” plateau emerged. And it seems I managed to merge all the parts together. All that remains is to redo the height map.
     

  2. #242

    Default

    How did you get into photorealistic map design? These are beautiful and look pretty real!
    What is your process when you start a new project?

  3. #243
    Guild Adept Harrg's Avatar
    Join Date
    Apr 2011
    Location
    Russia. Россия
    Posts
    314

    Default

    Thank you very much. I don't have any other projects planned. This is my magna opus.
    I have described this process many times. It's quite simple. But it wastes a lot of time.
    All my maps are based on a height map. I realized pretty quickly that with a good height map you can create a variety of map styles, from realistic satellite simulations to hill shades.
    Therefore, the basis of all my work is to edit the height map.
    A height map is a boring black and white image. Where black is the bottom. White is a mountain peak.
    For convenience, when I draw in Photoshop, I overlay a gradient map on top, which colors my black and white height map according to the height. This makes the job easier.
    How to make a height crater? There are many paths and a lot of little tricks.
    I mainly use a real world height map - DEM, you can see how to extract them in this Morne tutorial.
    https://www.cartographersguild.com/showthread.php?t=47393
    I sew a bunch of small pieces into one fabric. By masking and scaling, changing brightness and contrast, you can achieve good results. Don't use large pieces.
    Then I need to marry it all together. I use Wilbur for this. After running with Wilbur, I again supplement with piles from DEM. And again Wilbur and so many, many times. In some difficult places, I manually draw a height map, mixing it with DEM.




    But the basis of "realism" is not so much a height map as an understanding of geology and tectonics. I pay quite a lot of attention to gplates. So that my mountains and faults are justified. Although I have many “controversial” decisions that I cannot explain. This is due to the fact that I did not start making the world from scratch in gplates, but already had a ready-made map in my head, which was difficult to fit into a plausible world.
    When the height map is ready, you can see what you got. I use photoshop.
    Create an empty layer and fill it with gray. Copy the height map. Create an alpha channel. Insert a height map into the alpha channel. Select the gray layer. Select lighting filter effects. Endless light. Select your alpha channel with the height map in the filter. Extrude. (9-15 is enough). Ready. You have received a shaded height map.
    Now place a height map with a gradient map on top of the shaded map. Set the opacity to 50 or set the layer effect to multiply. Ready!
    If you want to take a satellite image, use textures instead of a gradient map. Simple textures of sand and grass are enough, the main thing is not the texture, but the slight noise and color. In the layer settings, you can “hide” part of the layer depending on the brightness of the pixel by moving the bar 0-255. Because We have a height map, so you can color only certain areas of heights.

    Repeat this process many times, add different layers, sand, snow, forest, swamps and you will get the desired result.
    Last edited by Harrg; 11-05-2023 at 04:35 PM.

  4. #244
    Guild Member
    Join Date
    Dec 2018
    Location
    Dingwall, Scotland
    Posts
    91

    Default

    I absolutely love your work Harrg, looking forward to see how the project develops further.

  5. #245
    Professional Artist Naima's Avatar
    Join Date
    Mar 2010
    Location
    Italy
    Posts
    1,583

    Default

    Quote Originally Posted by Harrg View Post
    Thank you very much. I don't have any other projects planned. This is my magna opus.
    I have described this process many times. It's quite simple. But it wastes a lot of time.
    All my maps are based on a height map. I realized pretty quickly that with a good height map you can create a variety of map styles, from realistic satellite simulations to hill shades.
    Therefore, the basis of all my work is to edit the height map.
    A height map is a boring black and white image. Where black is the bottom. White is a mountain peak.
    For convenience, when I draw in Photoshop, I overlay a gradient map on top, which colors my black and white height map according to the height. This makes the job easier.
    How to make a height crater? There are many paths and a lot of little tricks.
    I mainly use a real world height map - DEM, you can see how to extract them in this Morne tutorial.
    https://www.cartographersguild.com/showthread.php?t=47393
    I sew a bunch of small pieces into one fabric. By masking and scaling, changing brightness and contrast, you can achieve good results. Don't use large pieces.
    Then I need to marry it all together. I use Wilbur for this. After running with Wilbur, I again supplement with piles from DEM. And again Wilbur and so many, many times. In some difficult places, I manually draw a height map, mixing it with DEM.




    But the basis of "realism" is not so much a height map as an understanding of geology and tectonics. I pay quite a lot of attention to gplates. So that my mountains and faults are justified. Although I have many “controversial” decisions that I cannot explain. This is due to the fact that I did not start making the world from scratch in gplates, but already had a ready-made map in my head, which was difficult to fit into a plausible world.
    When the height map is ready, you can see what you got. I use photoshop.
    Create an empty layer and fill it with gray. Copy the height map. Create an alpha channel. Insert a height map into the alpha channel. Select the gray layer. Select lighting filter effects. Endless light. Select your alpha channel with the height map in the filter. Extrude. (9-15 is enough). Ready. You have received a shaded height map.
    Now place a height map with a gradient map on top of the shaded map. Set the opacity to 50 or set the layer effect to multiply. Ready!
    If you want to take a satellite image, use textures instead of a gradient map. Simple textures of sand and grass are enough, the main thing is not the texture, but the slight noise and color. In the layer settings, you can “hide” part of the layer depending on the brightness of the pixel by moving the bar 0-255. Because We have a height map, so you can color only certain areas of heights.

    Repeat this process many times, add different layers, sand, snow, forest, swamps and you will get the desired result.
    More or less my same technique.
    About ur starting process I find that there is always a way to justify even weird shapes, as long as you carefully plan the tectonics ... after all have you seen how weird are the Real Earth shapes? Someone could say they look too convenient and unrealistic XD.

  6. #246
    Guild Adept Harrg's Avatar
    Join Date
    Apr 2011
    Location
    Russia. Россия
    Posts
    314

    Default

    ### Latest WIP ###
    I was inspired by the latest updates to Tiluchi and Charerg and decided to update my map. The search for forms for other continents is underway again. The small subcontinent of Kilba appeared.
    Attached Images Attached Images

  7. #247
    Guild Adept Harrg's Avatar
    Join Date
    Apr 2011
    Location
    Russia. Россия
    Posts
    314

    Default

    ### Latest WIP ###
    new continent Selifalar
    Attached Images Attached Images

  8. #248
    Professional Artist Naima's Avatar
    Join Date
    Mar 2010
    Location
    Italy
    Posts
    1,583

    Default

    Quote Originally Posted by Harrg View Post
    ### Latest WIP ###
    new continent Selifalar
    Очень хорошо!

  9. #249
    Guild Adept Harrg's Avatar
    Join Date
    Apr 2011
    Location
    Russia. Россия
    Posts
    314

    Wip

    Quote Originally Posted by Naima View Post
    Очень хорошо!
    Спасибо большое!

    I have fun again with gradients it helps me see mistakes
    I'm constantly adjusting the elevation and coastline. For now, I’m not going into too much detail on the coast, because I can make many serious changes at any time. But in those areas that I'm satisfied added new small details
     



     


    Attached Images Attached Images
    Last edited by Harrg; 05-11-2024 at 09:37 AM.

  10. #250
    Guild Adept Harrg's Avatar
    Join Date
    Apr 2011
    Location
    Russia. Россия
    Posts
    314

    Default

    I haven't done anything with a height map for quite some time. Because busy again and again I return to the tectonic model
    I liked the new feature in gplates 2.5.0 that allows you to visually highlight subduction zones.
    I added one more, this time I think the last of the unworthy continents with the temporary working name of Ethelba or Sedna
    Now my task is to reconstruct the super continent and I may also need to dive into the moment of its formation. Without going into too much detail.
    I have noticed that many of my orogenies are too thick and I may have to put them on a diet, reducing the thickness significantly. They also descend too smoothly, I would like more pronounced rises.
    A working model of the tetconics of the whole world is beginning to emerge in my mind. Now all the plates are moving at the same speed. I gradually edit it, speeding it up and slowing it down to make it more believable. I still have several difficult areas that I have not yet fully explored. This is a complex region in the center, with rather intricate tectonics. And so far I haven’t slowed down to it. And the South Pole.
    Here's a short video on tectonics
    click
     



Page 25 of 26 FirstFirst ... 15212223242526 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •