Results 1 to 10 of 157

Thread: (WIP) Arch City of Nessa'Mor

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Guild Expert Facebook Connected XCali's Avatar
    Join Date
    Nov 2016
    Posts
    1,612

    Default

    Quote Originally Posted by Chashio View Post
    I like this.

    I might suggest lightening the grass a bit, as light tends to brighten flat, horizontal surfaces a lot, but this is pretty cool. Waterfalls are really difficult to make look right, and harder when they're right on the edge of the picture like that, but I think it reads ok for the most part. Nice work on this. It has a very interesting, epic feel to it.
    Thanks!
    It is a definitely a change of pace figuring out how to tackle this type of map.
    A few questions though, with the light, do you mean light the grass as a whole or just areas of it? (Though, I'm thinking of putting a forest up top and maybe a castle.)

    And, I just started with the falls today. But, if you would recommend a change in it, what would it be?

    (Again thanks)

    Quote Originally Posted by Mouse View Post
    I really like your cliffs

    Since you are working on the ocean, how about fading it out more at the edge?
    Thanks a bunch!

    Hmmm, I'm not sure I understand what you mean... Can you elaborate on it, please?
    Last edited by XCali; 05-16-2017 at 10:03 AM.

  2. #2
    Guild Master Chashio's Avatar
    Join Date
    Jan 2011
    Location
    Maine, USA
    Posts
    2,235

    Default

    Quote Originally Posted by XCali View Post
    Thanks!
    It is a definitely a change of pace figuring out how to tackle this type of map.
    A few questions though, with the light, do you mean light the grass as a whole or just areas of it? (Though, I'm thinking of putting a forest up top and maybe a castle.)

    And, I just started with the falls today. But, if you would recommend a change in it, what would it be?

    (Again thanks)
    I love the look and challenge of perspective-type maps
    I mean all of the grass; as a plane/flat surface it would perhaps read better next to the lighter ground areas you have... not quite that light, maybe just half or so toward the lighter value of the other flat ground. Under heavy forest it would obviously be shaded and what you have currently would work well.

    For the falls, I would say... soften the hard edge at the top to suggest the falls have a bit more force flowing over the edge of the cliff instead of just dropping straight down in a trickle... there's usually a bit of a curve as water flows off the edge of stuff, but you probably won't need much.
    Also, you might pull the bottom left edge of the falls more to the right, and shade a bit of the cliff to the left of the falls where it curves away from the sunlight so it looks like it goes back in behind the fall [especially toward the bottom, to give it some breathing room as the fall disappears into the hole]. As it is, your falls appear to hug the shape of the cliff a lot and these adjustments should help it read better, unless you want the water to be a thin sheet racing down a steep slope... which could be interesting as well.

    Let me know if that didn't clear things up.

    Edit: Also, take a look at some of the waterfalls in Iceland for some similar examples of what I'm talking about on that second point... particularly Skogafoss, Svartifoss, and Haifoss.
    Last edited by Chashio; 05-16-2017 at 10:12 AM.
    Kaitlin Gray - Art, Maps, Etc | Patreon | Instagram

  3. #3
    Guild Expert Facebook Connected XCali's Avatar
    Join Date
    Nov 2016
    Posts
    1,612

    Default

    Quote Originally Posted by Chashio View Post
    I love the look and challenge of perspective-type maps
    I mean all of the grass; as a plane/flat surface it would perhaps read better next to the lighter ground areas you have... not quite that light, maybe just half or so toward the lighter value of the other flat ground. Under heavy forest it would obviously be shaded and what you have currently would work well.

    For the falls, I would say... soften the hard edge at the top to suggest the falls have a bit more force flowing over the edge of the cliff instead of just dropping straight down in a trickle... there's usually a bit of a curve as water flows off the edge of stuff, but you probably won't need much.

    Also, you might pull the bottom left edge of the falls more to the right, and shade a bit of the cliff to the left of the falls where it curves away from the sunlight so it looks like it goes back in behind the fall [especially toward the bottom, to give it some breathing room as the fall disappears into the hole]. As it is, your falls appear to hug the shape of the cliff a lot and these adjustments should help it read better, unless you want the water to be a thin sheet racing down a steep slope... which could be interesting as well.

    Let me know if that didn't clear things up.

    Edit: Also, take a look at some of the waterfalls in Iceland for some similar examples of what I'm talking about on that second point... particularly Skogafoss, Svartifoss, and Haifoss.
    Thanks a lot, that is definitely useful. I tried it a bit. See if I went in the direction you prescribed.

    Click image for larger version. 

Name:	Nessa'Mor_Waterfall2_ByOmriHope.jpeg 
Views:	36 
Size:	1.91 MB 
ID:	95788



    ***

    One last one for today, I started a cave into the cliff,
    Click image for larger version. 

Name:	Nessa'Mor_Cave_ByOmriHope.jpeg 
Views:	36 
Size:	1.90 MB 
ID:	95795

    What do you guys think?
    Last edited by XCali; 05-16-2017 at 04:07 PM.

  4. #4
    Guild Expert Facebook Connected XCali's Avatar
    Join Date
    Nov 2016
    Posts
    1,612

    Question Nessa'Mor Beach attempt 1

    On top of the morning everyone,

    Today I started out with the beach. I used a photo I took a while back to get the effect. So tell me what you think.

    I'm happy so far with the cave and the changes to the waterfall, but I would like your feedback on it.

    The rest was just cleaning up and adding a little detail to the trees.

    So here it is,

    Click image for larger version. 

Name:	Nessa'Mor_Beach_byOmriHope.jpeg 
Views:	51 
Size:	1.88 MB 
ID:	95814

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •